SMC pneumatic pneumatic cylinders, actuators, grippers and clamps - products configurators & selectors
SMC is a leading supplier of pneumatic and electrical automation technology offering industrial and process automation, components and solutions.
Promoting advanced automation through automated control technology.
SMC Corporation of America is part of a global organization that supports our customers in every industrialized country, and is the U.S. subsidiary of SMC Corporation based in Japan.
Promoting advanced automation through automated control technology.
SMC Corporation of America is part of a global organization that supports our customers in every industrialized country, and is the U.S. subsidiary of SMC Corporation based in Japan.
Choose an SMC actuator product category and configure it to match your application
1. Cylinder actuators
(back to main index)▲
We offer 2 distinct ways to select your SMC actuator:
By feature, for users discovering SMC products, who wish to select actuators purely by technical attributes
By series name, for users already familiar with SMC products, who wish to configure a product within a series they have a already chosen
a. Select our actuators by key feature
b. Select our actuators alphabetically by series name
1.1. Standard actuators
(back to main index)▲
1.1.1. Configure NCQ2 series (imperial) products
(Back to cylinder actuators index)▲
The NCQ2 compact cylinder is the inch (imperial) version of the world's best selling pneumatic cylinder and can be supported globally.
The NCQ2 is available in 13 bore sizes from 12mm to 160mm.
It comes standard with male or female piston rod threads.
Read more about this series in the SMC datasheet for NCQ2 or start configuring your NCQ2 by selecting a product type in below selection table:
The NCQ2 is available in 13 bore sizes from 12mm to 160mm.
It comes standard with male or female piston rod threads.
Read more about this series in the SMC datasheet for NCQ2 or start configuring your NCQ2 by selecting a product type in below selection table:
 |
 |
 |
|
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
| Available in double-acting, single rod and bore sizes from 12mm to 100mm. | Available in double-acting, single rod and bore sizes from 12mm to 63mm. | Available in double-acting, double rod and bore sizes from 12mm to 63mm. | Available in single-acting single rod and bore sizes from 12mm to 50mm. | Available in single-acting single rod and bore sizes from 12mm to 50mm. | Available in double-acting, single rod and bore sizes from 125mm to 160mm. | Available in double-acting double rod and bore sizes from 12mm to 100mm. | Available in double-acting, double rod and bore sizes from 125mm to 160mm. | Low-temperature option (XB7) from -40°F to +158°F (-40°C to +70°C), high temperature option (XB6) from +10°F to +302°F (-12°C to +150°C) and heat-resistant auto switch option (XB14) from 0°F to +302°F. | XB13 for low-speed applications (5 to 50mm/s). | XC8 stroke adjustable for the extend stroke. | XC9 stroke adjustable for the retract stroke. | XC10 dual stroke, double rod type (4 positions). | XC11 dual stroke, singe rod type (3 positions). | XC4 Heavy duty scraper for dusty environments. | XC35 Rod coil scraper for welding icy or frosty environments. | XC6 stainless steel piston rod option. | |||
1.1.2. Configure CQ2 series (metric) products
(Back to cylinder actuators index)▲
The CQ2 compact cylinder is the world's best selling metric pneumatic cylinder and is supported globally.
Available in 15 bore sizes from 12mm to 200mm. It comes standard with male or female piston rod threads.
42 standard options make it one of the most versatile cylinder series on the market.
For mounting flexibility, it is possible to mount auto switches on any of the 4 surfaces.
Read more about this series in the SMC datasheet for CQ2 or start configuring your CQ2 by selecting a product type in below selection table:
Available in 15 bore sizes from 12mm to 200mm. It comes standard with male or female piston rod threads.
42 standard options make it one of the most versatile cylinder series on the market.
For mounting flexibility, it is possible to mount auto switches on any of the 4 surfaces.
Read more about this series in the SMC datasheet for CQ2 or start configuring your CQ2 by selecting a product type in below selection table:
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
 |
 |
 |
 |
| Available in bore sizes from 12mm to 100mm. | Available in bore sizes from 12mm to 100mm. | Available in bore sizes from 12mm to 50mm. | Available in bore sizes from 12mm to 50mm. | Available in bore sizes from 125mm to 200mm. | Available in bore sizes from 125mm to 200mm. | Available in bore sizes from 12mm to 100mm and strokes are up to 200mm. | Available in bore sizes from 12mm to 63mm. | Available in bore sizes from 12mm to 63mm. | Both ports on one side of the actuator. Available in bore sizes from 12mm to 100mm. | Ports on the end of the actuator. Available in bore sizes from 12mm to 50mm. | Ports on the end of the actuator. Available in bore sizes from 12mm to 50mm. | End of stroke locks are included can be used to hold a load in case of a loss of air pressure. | Items include a rod wiper to prevent moisture from entering the actuator. Available in bore sizes from 20mm to 100mm. | double-acting cylinder is available in bore sizes from 32mm to 100mm. | High-temperature option (XB6) temperature range +10°F to +302°F (-12°C to +150°C). | Low-temperature option (XB7) temperature range -40°F to +158°F (-40°C to +70°C). | Heat-resistant auto switch option (XB14) temperature range 0°F to +302°F (-17°C to +150°C). | High lateral load version of the standard double-acting, single rod version of the CQ2 compact cylinder allows for higher side loads that the standard CQ2. | XB9 for low-speed applications (10 to 50mm/s). | XB option for low-speed applications (5 to 50mm/s). | XC8 stroke adjustable for the extend stroke. | XC9 stroke adjustable for the retract stroke. | XC10 dual stroke, double rod type (4 positions). | XC11 dual stroke, singe rod type (3 positions). | XB14 cylinder with heat-resistant auto-switch, max temp +302°F (+150°C). | XC4 heavy-duty scraper for dusty environments. | XC35 rod coil scraper for welding icy or frosty environments. | XC6 stainless steel piston rod option. | XC85 grease for food processing machines. | XC92 dust-resistant cylinder for micro powder environments. | |
1.1.3. Configure NCG series products
(Back to cylinder actuators index)▲
The NCG series is an extremely durable, repairable round body cylinder that provides precision mounting, short overall length, light weight and high speed.
Rubber bumpers are standard with an option for adjustable air cushion.
Nine mounting styles are available for cylinder mounting flexibility.
Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm).
Standard available stroke lengths from 1" to 12" but with the ability for long strokes.
The NCG series is auto-switch capable and is capable of speeds up to 40 in/sec.
The NCG series is available in 11 standard options to help fit into many different applications.
Read more about this series in the SMC datasheet for NCG or start configuring your NCG by selecting a product type in below selection table:
Rubber bumpers are standard with an option for adjustable air cushion.
Nine mounting styles are available for cylinder mounting flexibility.
Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm).
Standard available stroke lengths from 1" to 12" but with the ability for long strokes.
The NCG series is auto-switch capable and is capable of speeds up to 40 in/sec.
The NCG series is available in 11 standard options to help fit into many different applications.
Read more about this series in the SMC datasheet for NCG or start configuring your NCG by selecting a product type in below selection table:
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
 |
 |
 |
 |
| Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm) and stroke lengths from 1" to 12". | Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm). | Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm). | Bore sizes range from 3/4"(20mm) to 1-1/2" (40mm). | Bore sizes range from 3/4"(20mm) to 1-1/2" (40mm). | XB13 capable of low speeds range of 5 to 50mm/s. | XC8 option has adjustable stroke in the extend direction. | XC9 option has adjustable stroke in the retract direction. | XC10 is dual stroke with 4 positions (double rod type). | XC11 is dual stroke with 3 positions (single rod type). | Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm). | Low-temperature (XB7) ambient range -40°F to +158°F (-40 to 70°C). Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm). | The XC6 option can be used in applications where corrosion is a problem. | The XC37 option is used where light loads need higher than standard speeds. | |
1.1.4. Configure NCM series (stainless Steel) products
(Back to cylinder actuators index)▲
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders.
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Available for front nose, double end and rear pivot mounting. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose double end mounting. The double end mount does automatically include a rear clevis hole. Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for double-acting, single rod and bore sizes range from 7/16" to 1-1/2" and standard strokes from 1/2" to 12". | High-temperature option (XB6) temperature range -4°F to 300°F (-20°C to +150°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Low-temperature option (XB7) temperature range -22°F to 158°F (-30°C to +70°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | |
1.1.5. Configure CM2 series products
(Back to cylinder actuators index)▲
Series CM2-Z stainless steel cylinders are compact, lightweight and offer high performance.
The piston seal and rod seal design provides excellent life.
Transparent auto switch bracket provides visibility of the status of the switch.
The CM2-Z series delivers extra flexibility including the option of male and female rods.
Where space is at a premium, you can select a female rod end (up to 29 mm shorter) and/or boss-cut type (up to 16 mm shorter).
Rubber bumpers are standard.
The CM2-Z series offers a variety of mounting options.
Read more about this series in the SMC datasheet for CM2 or start configuring your CM2 by selecting a product type in below selection table:
The piston seal and rod seal design provides excellent life.
Transparent auto switch bracket provides visibility of the status of the switch.
The CM2-Z series delivers extra flexibility including the option of male and female rods.
Where space is at a premium, you can select a female rod end (up to 29 mm shorter) and/or boss-cut type (up to 16 mm shorter).
Rubber bumpers are standard.
The CM2-Z series offers a variety of mounting options.
Read more about this series in the SMC datasheet for CM2 or start configuring your CM2 by selecting a product type in below selection table:
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Total length shortened with boss-cut type. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Total length shortened with boss-cut type. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Basic, foot, front, rear flange, single, double clevis, rod, head trunnion mounting. Variety of switches and a variety of lead wire lengths. | Bore sizes are 20, 25, 32 and 40mm. Rubber bumper or air cushion. Compact and light weight. Auto switch capable. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Direct to bottom or front mounts. Variety of switches and lead wire lengths. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Direct to bottom or front mounts. Variety of switches and lead wire lengths. | Minimum operating pressure 0.02MPa. Bore sizes are 20, 25, 32, 40mm. Strokes are 25, 50, 75, 100, 125, 150, 200, 250 and 300mm. Various mounting options. | It has high temperature, +14°F to +302°F (-10°C to +150°C), (XB6), available for 20, 25, 32, 40mm bore sizes. | Low-temperature, -40°F to +158°F (-40°C to +70°C), (XB7) available for 20, 25, 32 and 40mm bore sizes. | XB9 is capable of low speeds range of 5 to 50mm/s. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC8 option has adjustable stroke in d direction. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC9 option has adjustable stroke in the retract direction. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC10 is dual stroke with 4 positions (double rod type). Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC11 is dual stroke with 3 position (single rod type). Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC12 is tandem dual force cylinder. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | Rod wiper prevents contamination from entering the cylinder. | Stainless steel piston rod replaces the standard carbon steel piston rod. | FKM seals option. | Rod coil scraper (XC35) can be used for removing weld slag, ice and other contaminants from the piston rod. | Food grade grease (XC85) replaces the standard internal grease. | Axial port option (XC20) is available. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm through 500mm. Basic, foot, front trunnion mounts. Variety of switches and a variety of lead wire lengths. | 8 mounting options available. Bore sizes are 20mm, 25mm, 32mm and 40mm. Auto switch capability. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm through 500mm. Basic, foot, front & rear flange, clevis and trunnion mounts. Variety of switches and a variety of lead wire lengths. | |
1.1.6. Configure NCA1 series products
(Back to cylinder actuators index)▲
Series NCA1 medium duty tie-rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles.
Bore sizes range from 1.5 to 4 inches.
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
Bore sizes range from 1.5 to 4 inches.
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Medium duty tie-rod cylinders are double-acting, single rod, double rod, non-rotating, oversized road, large road options. | XB6 high-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB7 low-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB9 low-speed option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC8 adjustable stroke, extension type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC9 adjustable stroke, retraction type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC6 stainless steel piston rod option is double-acting, environment option. | XC22 fluoro-rubber seals option is double-acting, environment option. | XC35 coil scraper option is double-acting, environment option. | X130US stainless steel parts are piston rod, tie-rod/nut, cushion valve needle. | |
1.1.7. Configure CS1 series products
(Back to cylinder actuators index)▲
Series CS1 air cylinder is SMC's largest bore cylinder.
This series is available in bore sizes up to 300mm and stroke lengths up to 2400mm.
Additionally, the CS1 can be ordered auto-switch capable.
Other options include, large bore sizes up to 300mm, various mounting configurations, cushion for noise damping.
Read more about this series in the SMC datasheet for CS1 or start configuring your CS1 by selecting a product type in below selection table:
This series is available in bore sizes up to 300mm and stroke lengths up to 2400mm.
Additionally, the CS1 can be ordered auto-switch capable.
Other options include, large bore sizes up to 300mm, various mounting configurations, cushion for noise damping.
Read more about this series in the SMC datasheet for CS1 or start configuring your CS1 by selecting a product type in below selection table:
 |
 |
 |
 |
 |
 |
 |
 |
| This version is NOT pre-lubricated so a lubricator in your system is required. Bore sizes range from 125mm to 300mm. Strokes are up to 2400mm. | Bore sizes range from 125mm to 300mm. Strokes are up to 2400mm. | Bore sizes are 125, 140, 160, 180, 200, 250 and 300mm. Mountings are basic, foot, flange, trunnion. Rod boots and cushions available. Auto switch capable for 125mm-200mm bores. | Bore sizes are 125, 140, 160, 180, 200, 250 and 300mm. Mountings are basic, foot, flange, trunnion. Rod boots and cushions available. Auto switch capable for 125mm-200mm bores. | Available with Rc, NPT or G port threads. Bore sizes are 125, 140 and 160mm. Auto switch capable. Variety of lead wires or prewired connectors. | Bore sizes are 125, 140 and 160mm. Strokes are up to 1600mm available. Seven mounting options available. Auto switch capable. | Bore sizes are 125, 140 and 160mm. Mountings are basic, foot, flange, trunnion. Rod boots available (cushion not available). Auto switch capable. |
1.1.8. Configure CS2 series products
(Back to cylinder actuators index)▲
Series CS2 air cylinder is a double-acting, non-lube air cylinder.
Aluminum die-cast is used for both the rod and head covers, which means a maximum weight reduction of approximately 50% (basic 125mm bore, 100mm stroke).
This series is available in bore sizes 125mm, 140mm and 160mm with maximum strokes are up to 1600mm (depending on the mounting configuration).
Air cushions are standard on both ends.
Other options include auto switches, rod boots, and Rc, NPT or G thread types.
Read more about this series in the SMC datasheet for CS2 or start configuring your CS2 by selecting a product type in below selection table:
Aluminum die-cast is used for both the rod and head covers, which means a maximum weight reduction of approximately 50% (basic 125mm bore, 100mm stroke).
This series is available in bore sizes 125mm, 140mm and 160mm with maximum strokes are up to 1600mm (depending on the mounting configuration).
Air cushions are standard on both ends.
Other options include auto switches, rod boots, and Rc, NPT or G thread types.
Read more about this series in the SMC datasheet for CS2 or start configuring your CS2 by selecting a product type in below selection table:
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Bore sizes are 125, 140, 160mm with maximum strokes are up to 1600mm. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Bore sizes are 125, 140, 160mm with maximum strokes are up to 1200mm. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Smooth option is perfect for low pressure or low-speed applications. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Rod-end bracket included for easy assembly. Bore sizes are 125, 140, 160mm with maximum strokes are up to 1600mm. Available port threads are Rc, NPT, G. Auto switch capable. | XB6 high temperature ambient range +32°F to +302°F (0 to +150°C). Rod-end bracket included for easy assembly. Bore sizes are 125, 140, 160m. | Front and rear port location is selectable. Bore sizes are 125, 140, 160mm. Available port threads are Rc, NPT, G. Auto switch capable. | XC9 option has adjustable stroke in the retract direction. Bore sizes are 125, 140, 160mm. Variety of switches and lead wire lengths. | XC4 heavy-duty rod scraper for dusty environments. | XC22 Fluororubber seals for chemical compatibility. | XC35 rod coil scraper to remove weld slag from piston rod. | XC68 hard chrome plated, stainless steel piston rod. | |
1.2. Stainless steel body actuators
(back to main index)▲
1.2.1. Configure NCM series products
(Back to cylinder actuators index)▲
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders.
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Available for front nose, double end and rear pivot mounting. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose double end mounting. The double end mount does automatically include a rear clevis hole. Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for double-acting, single rod and bore sizes range from 7/16" to 1-1/2" and standard strokes from 1/2" to 12". | High-temperature option (XB6) temperature range -4°F to 300°F (-20°C to +150°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Low-temperature option (XB7) temperature range -22°F to 158°F (-30°C to +70°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | |
1.2.2. Configure NCJ2 series products
(Back to cylinder actuators index)▲
Series NCJ2 miniature cylinders available in spring-return (spring-extend), or double-acting all offer stainless steel tubing and stainless steel rods.
Available in bore sizes 6, 10, 16mm and standard stroke lengths up to 8".
Basic, foot, front flange and double rear clevis mounting options.
Auto-switch capable.
Other features include non-rotating, double rod, rubber bumpers and a stainless steel body.
Read more about this series in the SMC datasheet for NCJ2 or start configuring your NCJ2 by selecting a product type in below selection table:
Available in bore sizes 6, 10, 16mm and standard stroke lengths up to 8".
Basic, foot, front flange and double rear clevis mounting options.
Auto-switch capable.
Other features include non-rotating, double rod, rubber bumpers and a stainless steel body.
Read more about this series in the SMC datasheet for NCJ2 or start configuring your NCJ2 by selecting a product type in below selection table:
 |
|
 |
 |
|
| Bore sizes are 1/4" (6mm), 3/8" (10mm), 5/8" (16mm). Standard strokes from 1/2" to 8". Auto switch capable. | Bore sizes are 1/4" (6mm), 3/8" (10mm), 5/8" (16mm). Strokes are up to 2" as standard. Auto switch capable. Various options. | Bore sizes are 1/4" (6mm), 3/8" (10mm), 5/8" (16mm). Standard strokes from 1/2" to 5". Auto switch capable. | Bore sizes are 1/4" (6mm), 3/8" (10mm), 5/8" (16mm). Standard strokes from 1/2" to 5". Auto switch capable. |
1.2.3. Configure CM2 series stainless steel products
(Back to cylinder actuators index)▲
Series CM2-Z stainless steel cylinders are compact, lightweight and offer high performance.
The piston seal and rod seal design provides excellent life.
Transparent auto switch bracket provides visibility of the status of the switch.
The CM2-Z series delivers extra flexibility including the option of male and female rods.
Where space is at a premium, you can select a female rod end (up to 29 mm shorter) and/or boss-cut type (up to 16 mm shorter).
Rubber bumpers are standard.
The CM2-Z series offers a variety of mounting options.
Read more about this series in the SMC datasheet for CM2 or start configuring your CM2 by selecting a product type in below selection table:
The piston seal and rod seal design provides excellent life.
Transparent auto switch bracket provides visibility of the status of the switch.
The CM2-Z series delivers extra flexibility including the option of male and female rods.
Where space is at a premium, you can select a female rod end (up to 29 mm shorter) and/or boss-cut type (up to 16 mm shorter).
Rubber bumpers are standard.
The CM2-Z series offers a variety of mounting options.
Read more about this series in the SMC datasheet for CM2 or start configuring your CM2 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Total length shortened with boss-cut type. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Total length shortened with boss-cut type. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Easy fine adjustment of auto switch position. Standard stroke sizes are 25, 50, 75, 10, 125, 150, 200 and 250mm. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Basic, foot, front, rear flange, single, double clevis, rod, head trunnion mounting. Variety of switches and a variety of lead wire lengths. | Bore sizes are 20, 25, 32 and 40mm. Rubber bumper or air cushion. Compact and light weight. Auto switch capable. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Direct to bottom or front mounts. Variety of switches and lead wire lengths. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm to 300mm. Direct to bottom or front mounts. Variety of switches and lead wire lengths. | Minimum operating pressure 0.02MPa. Bore sizes are 20, 25, 32, 40mm. Strokes are 25, 50, 75, 100, 125, 150, 200, 250 and 300mm. Various mounting options. | It has high temperature, +14°F to +302°F(-10°C to 150°C), (XB6), available for 20, 25, 32, 40mm bore sizes. | Low-temperature, -40°F to +158°F (-40°C to 70°C), (XB7) available for 20, 25, 32 and 40mm bore sizes. | XB9 is capable of low speeds range of 5 to 50mm/s. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC8 option has adjustable stroke in d direction. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC9 option has adjustable stroke in the retract direction. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC10 is dual stroke with 4 positions (double rod type). Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC11 is dual stroke with 3 position (single rod type). Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | XC12 is a tandem cylinder. Bore sizes are 20, 25, 32, 40mm. Variety of switches and lead wire lengths. | Rod wiper prevents contamination from entering the cylinder. | Stainless steel piston rod replaces the standard carbon steel piston rod. | FKM seals option. | Rod coil scraper (XC35) can be used for removing weld slag, ice and other contaminants from the piston rod. | Food grade grease (XC85) replaces the standard internal grease. | Axial port option (XC20) is available. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm through 500mm. Basic, foot, front trunnion mounts. Variety of switches and a variety of lead wire lengths. | 8 mounting options available. Bore sizes are 20mm, 25mm, 32mm and 40mm. Auto switch capability. | Bore sizes are 20, 25, 32 and 40mm. Strokes from 25mm through 500mm. Basic, foot, front & rear flange, clevis and trunnion mounts. Variety of switches and a variety of lead wire lengths. | |
1.2.4. Configure CM3 series products
(Back to cylinder actuators index)▲
Series CM3 double-acting, single rod cylinders are a fully functional, compact cylinder used for space saving designs.
The CM3 series offers a variety of mounting options and is auto switch capable.
The CM3 is now RoHS compliant.
Read more about this series in the SMC datasheet for CM3 or start configuring your CM3 by selecting a product type in below selection table:
The CM3 series offers a variety of mounting options and is auto switch capable.
The CM3 is now RoHS compliant.
Read more about this series in the SMC datasheet for CM3 or start configuring your CM3 by selecting a product type in below selection table:
 |
|
| Bore sizes are 20mm, 25mm, 32mm, 40mm. Strokes from 25mm through 300mm. Mountings are basic, foot, flange, clevis, trunnion. RoHS compliant. |
1.2.5. Configure CJ2 series products
(Back to cylinder actuators index)▲
Series CJ2-Z stainless steel tube, air cylinders are available in 10 and 16mm bore sizes with stroke lengths from 15mm to 200mm.
Available in 7 mounting types for versatility.
Auto switches are available in band and rail mounting types.
The CJ2-Z switch bracket is transparent to improve visibility of the indicator LED.
Pivot and rod end brackets can be ordered with the cylinder under one part number.
Read more about this series in the SMC datasheet for CJ2 or start configuring your CJ2 by selecting a product type in below selection table:
Available in 7 mounting types for versatility.
Auto switches are available in band and rail mounting types.
The CJ2-Z switch bracket is transparent to improve visibility of the indicator LED.
Pivot and rod end brackets can be ordered with the cylinder under one part number.
Read more about this series in the SMC datasheet for CJ2 or start configuring your CJ2 by selecting a product type in below selection table:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
|
|
 |
 |
 |
| Easy fine adjustments of auto switch position. Mounting types are double foot, Head Flange, double-side bossed. Rod end deflection accuracy improved. | Rods at both ends of cylinder. Bore sizes are 10, 16mm. Strokes from 15mm through 200mm. Mounts are basic, foot, front flange. Variety of switches and a variety of lead wire lengths. | Compact and lightweight. Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Compact and lightweight. Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Bore sizes are 10 and 16mm.Strokes from 15mm through 200mm. Variety of switches and a variety of lead wire lengths. | Bore sizes are 10 and 16mm. Strokes from 15mm through 150mm. Mounts are variety of mounting options. Variety of switches and lead wire lengths. | Bore sizes are 10 and 16mm. Strokes from 15mm through 150mm. Mounts are variety of mounting options. Variety of switches and lead wire lengths. | Bore sizes are 10, and 16mm. Strokes from 15mm through 200mm. Variety of switches and lead wire lengths. | Bore sizes are 10 and 16mm. Strokes from 15mm through 60mm. Mounts are basic, foot, flange. Variety of switches and lead wire lengths. | Compact and lightweight. Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150, 175, 200mm. Auto switch capable. | Compact and lightweight. Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Compact and lightweight. Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Bore sizes are 10 and 16mm.Strokes from 15mm through 200mm. Auto switch capable. | Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Bore sizes are 10, 16mm. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150mm. Auto switch capable. | Bore sizes are 10, 16mm. Standard stroke are 15, 30, 45, 60, 75, 100, 125, 150, 175, 200mm. Minimum operating pressure is 0.03MPa. | Low friction type. Mountings are basic, foot, flange, double clevis. Bore sizes are 10mm, 16mm. Strokes are up to 200mm. Auto switch capable. | High-temperature option. Bore sizes are 6, 10, 16mm. Ambient range from is -14°F to +302°F (-10 to 150°C.) | Low-temperature option. Bore sizes are 6, 10, 16mm. Ambient range is -40°F to +158°F (-40°C to +70°C). | XC3 option allows the rear port location to be specified. | XC51 option includes selectable hose nipples in the ports. | FKM seals option. Bores sizes are 10, 16mm. Easy fine adjustments of auto switch position. Mounting types are double foot, head Flange, double-side bossed. | Food processing grease option. Bores sizes are 10, 16mm. Easy fine adjustments of auto switch position. Mounting types are double foot, head Flange, double-side bossed. | XB9 low-speed cylinder (10 to 50mm/s). | XB13 low-speed cylinder (10 to 50mm/s) (6mm bore only). | XC8 extend stroke adjustable (10 and 16mm bore only). | XC9 retract stroke adjustable (10 and 16mm bore only). | 16mm bore. Mounting types are basic, axial foot, front flange, double clevis. Standard strokes are 15, 30, 45, 60, 75, 100, 125, 150, 175, 200mm. Auto switch capable. | For use in clean environment. Relief or vacuum suction types. Bore size and 10, 16mm. Auto switch capable. | For use in clean environment. Relief or vacuum suction types. Bore sizes are 10, 16mm. Auto switch capable. | |
1.3. Round body repairable actuators
(back to main index)▲
1.3.1. Configure CG1 series products
(Back to cylinder actuators index)▲
Series CG1-Z precision air cylinder has 8 bore sizes and can meet any application need.
The tube is impact extruded aluminum to produce an extraordinarily smooth finish, allow low break-away pressure and smooth stroke action.
Various mounting bracket options are available.
Female piston rod threads are available as a standard option.
Auto switch capable.
Read more about this series in the SMC datasheet for CG1 or start configuring your CG1 by selecting a product type in below selection table:
The tube is impact extruded aluminum to produce an extraordinarily smooth finish, allow low break-away pressure and smooth stroke action.
Various mounting bracket options are available.
Female piston rod threads are available as a standard option.
Auto switch capable.
Read more about this series in the SMC datasheet for CG1 or start configuring your CG1 by selecting a product type in below selection table:
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
| XB6 heat-resistant cylinder up to +302°F (+150°C). | XB7 cold-resistant cylinder down to -40°F (-40°C). | XB9 low-speed cylinder (10 to 50mm/s). | XB13 low-speed cylinder (50 to 50mm/s). | XC4 heavy-duty scraper. | XC6 piston rod, rod end nut SUS. | XC13A auto switch rail right side mounted. | XC13B auto switch rail left side mounted. | XC20 head cover axis direction port. | XC22 packing fluoro rubber. | XC37 orifice diameter of port enlarged. | XC42 built-in shock absorber, head cover side. | Bore sizes are 20, 25, 32, 40, 50, 63, 80 and 100mm. Strokes are 25 through 300mm. Mounts: basic, axial foot, flange, trunnion. Variety of switches available. | Bore sizes are 20, 25, 32, 40mm. Strokes are 25 through 200mm. Mounts; basic, foot, front or rear flange, front or rear trunnion, clevis. Auto switch capable with a variety of lead wire lengths. | Bore sizes are 20, 25, 32, 40mm. Strokes are 25 through 200mm. Mounts; basic, foot, front or rear flange, front or rear trunnion, clevis. Auto switch capable with a variety of lead wire lengths. | Bore sizes are 20, 25, 32, 40, 50, 63mm. Standard strokes are 25 to 300mm. High non-rotating accuracy. High speed operation/long life. Auto switch capable. | Bore sizes are 20, 25, 32, 40, 50, 63mm. Standard strokes are up to 300mm. High non-rotating accuracy. Auto switch capable with a variety of lead wires and prewired connectors. | Bore sizes are 20, 25, 32, 40, 50, 63mm. Strokes from 25mm through 300mm. Available with rubber bumper or air cushion. Variety of switches, lead wire lengths and prewired connectors. | Bore sizes are 20, 25, 32, 40, 50, 63mm. Standard stroke are 25, 50, 75, 100, 125, 150, 200, 250, 300mm. Auto switch capable. Variety of lead wires and prewired connectors. | 7 mounting styles available. Bore sizes are 20, 25, 32, 40, 50, 63, 80 and 100mm. Rubber bumper or air cushion standard. Auto switch capability. | Bore sizes are 20, 25, 32, 40, 50, 63, 80, 100mm. Strokes from 20mm through 300mm depending on bore size. Mounts: basic, axial foot, rod side or head side flange. | |
1.3.2. Configure NCG series products
(Back to cylinder actuators index)▲
The NCG series is an extremely durable, repairable round body cylinder that provides precision mounting, short overall length, light weight and high speed.
Rubber bumpers are standard with an option for adjustable air cushion.
Nine mounting styles are available for cylinder mounting flexibility.
Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm).
Standard available stroke lengths from 1" to 12" but with the ability for long strokes.
The NCG series is auto-switch capable and is capable of speeds up to 40 in/sec.
The NCG series is available in 11 standard options to help fit into many different applications.
Read more about this series in the SMC datasheet for NCG or start configuring your NCG by selecting a product type in below selection table:
Rubber bumpers are standard with an option for adjustable air cushion.
Nine mounting styles are available for cylinder mounting flexibility.
Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm).
Standard available stroke lengths from 1" to 12" but with the ability for long strokes.
The NCG series is auto-switch capable and is capable of speeds up to 40 in/sec.
The NCG series is available in 11 standard options to help fit into many different applications.
Read more about this series in the SMC datasheet for NCG or start configuring your NCG by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm) and stroke lengths from 1" to 12". | Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm). | Bore sizes range from 3/4"(20mm) to 2-1/2" (63mm). | Bore sizes range from 3/4"(20mm) to 1-1/2" (40mm). | Bore sizes range from 3/4"(20mm) to 1-1/2" (40mm). | XB13 capable of low speeds range of 5 to 50mm/s. | XC8 option has adjustable stroke in the extend direction. | XC9 option has adjustable stroke in the retract direction. | XC10 is dual stroke with 4 positions (double rod type). | XC11 is dual stroke with 3 positions (single rod type). | Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm). | Low-temperature (XB7) ambient range -40°F to +158°F (-40°C to 70°C). Bore sizes for the NCG range from 3/4"(20mm) to 2-1/2" (63mm). | The XC6 option can be used in applications where corrosion is a problem. | The XC37 option is used where light loads need higher than standard speeds. | |
1.4. Tie Rod Actuators
(back to main index)▲
1.4.1. Configure CA2 series products
(Back to cylinder actuators index)▲
SMC's series CA2 is a light weight tie-rod air cylinder.
Fine end of stroke cushioning adjustment is now possible due to the increase in the air cushion adjustment range.
The CA2 can be ordered with rod end or rear pivot brackets.
The CA2 is available in a large variety of options that will make them suitable for many different applications.
A variety of auto switches are available for mounting, including compact switches and magnetic field resistant switches.
The CA2 is available in 40, 50, 63, 80 and 100 bores sizes, and is RoHS compliant.
Read more about this series in the SMC datasheet for CA2 or start configuring your CA2 by selecting a product type in below selection table:
Fine end of stroke cushioning adjustment is now possible due to the increase in the air cushion adjustment range.
The CA2 can be ordered with rod end or rear pivot brackets.
The CA2 is available in a large variety of options that will make them suitable for many different applications.
A variety of auto switches are available for mounting, including compact switches and magnetic field resistant switches.
The CA2 is available in 40, 50, 63, 80 and 100 bores sizes, and is RoHS compliant.
Read more about this series in the SMC datasheet for CA2 or start configuring your CA2 by selecting a product type in below selection table:
|
|
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
 |
| Bore sizes are 40, 50, 63, 80, 100mm. Options include pivot bracket and/or knuckle joints. Auto switch capable. | Non-lube air-hydro type. Bore sizes are 40, 50, 63, 80, 100mm. Standard strokes are 25 to 700mm. Auto switch capable. | Bore sizes are 40, 50, 63mm. Standard stroke range is 25 to 600mm. Non-rotating accuracy is ±0.5°. Auto switch capable. | XB6 high temperature ambient range +14°F to +302°F (-10°C to 150°C). | XC5 high temperature ambient range +14°F to 246°F (-10°C to 110°C). | XC8 option has adjustable stroke in the extend direction. | XC9 option has adjustable stroke in the retract direction. | XC12 is a tandem dual power cylinder (single rod type). | XC4 heavy-duty rod scraper for dusty applications. | XC7 stainless steel tie-rods, cushion valve, tie-rod nuts. | XC22 Fluororubber seals for chemical compatibility. | XC35 rod coil scraper for welding icy or frosty environments. | XC65 stainless steel piston rod and tie-rods (Combination of XC7 and XC68). | XC85 grease for food processing machines. | Can be used with turbine oil. Bore sizes are 40, 50, 63, 80, 100mm. Options include pivot bracket and/or knuckle joints. Auto switch capable. | Can be used with turbine oil. Bore sizes are 40, 50, 63, 80, 100mm. Options include pivot bracket and/or knuckle joints. Auto switch capable. | Bore sizes are 40, 50, 63mm. Standard strokes are 50, 75, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500mm. Rc, NPT or G port threads. | Bore sizes are 40, 50, 63mm. Standard strokes are 50, 75, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500mm. Rc, NPT or G port threads. | Bore sizes are 40, 50, 63mm. Standard strokes are 50, 75, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500mm. Rc, NPT or G port threads. | |
1.4.2. Configure NCA1 series products
(Back to cylinder actuators index)▲
Series NCA1 medium duty tie-rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles.
Bore sizes range from 1.5 to 4 inches.
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
Bore sizes range from 1.5 to 4 inches.
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
| Medium duty tie-rod cylinders are double-acting, single rod, double rod, non-rotating, oversized road, large road options. | XB6 high-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB7 low-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB9 low-speed option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC8 adjustable stroke, extension type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC9 adjustable stroke, retraction type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC6 stainless steel piston rod option is double-acting, environment option. | XC22 fluoro-rubber seals option is double-acting, environment option. | XC35 coil scraper option is double-acting, environment option. | X130US stainless steel parts are piston rod, tie-rod/nut, cushion valve needle. | |
1.4.3. Configure CS2 series products
(Back to cylinder actuators index)▲
Series CS2 air cylinder is a double-acting, non-lube air cylinder.
Aluminum die-cast is used for both the rod and head covers, which means a maximum weight reduction of approximately 50% (basic 125mm bore, 100mm stroke).
This series is available in bore sizes 125mm, 140mm and 160mm with maximum strokes are up to 1600mm (depending on the mounting configuration).
Air cushions are standard on both ends.
Other options include auto switches, rod boots, and Rc, NPT or G thread types.
Read more about this series in the SMC datasheet for CS2 or start configuring your CS2 by selecting a product type in below selection table:
Aluminum die-cast is used for both the rod and head covers, which means a maximum weight reduction of approximately 50% (basic 125mm bore, 100mm stroke).
This series is available in bore sizes 125mm, 140mm and 160mm with maximum strokes are up to 1600mm (depending on the mounting configuration).
Air cushions are standard on both ends.
Other options include auto switches, rod boots, and Rc, NPT or G thread types.
Read more about this series in the SMC datasheet for CS2 or start configuring your CS2 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
| Bore sizes are 125, 140, 160mm with maximum strokes are up to 1600mm. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Bore sizes are 125, 140, 160mm with maximum strokes are up to 1200mm. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Smooth option is perfect for low pressure or low-speed applications. Available port threads are Rc, NPT, G. Optional rod boots. Auto switch capable. | Rod-end bracket included for easy assembly. Bore sizes are 125, 140, 160mm with maximum strokes are up to 1600mm. Available port threads are Rc, NPT, G. Auto switch capable. | XB6 high temperature ambient range +32°F to +302°F (0°C to +150°C). Rod-end bracket included for easy assembly. Bore sizes are 125, 140, 160m. | Front and rear port location is selectable. Bore sizes are 125, 140, 160mm. Available port threads are Rc, NPT, G. Auto switch capable. | XC9 option has adjustable stroke in the retract direction. Bore sizes are 125, 140, 160mm. Variety of switches and lead wire lengths. | XC4 heavy-duty rod scraper for dusty environments. | XC22 Fluororubber seals for chemical compatibility. | XC35 rod coil scraper to remove weld slag from piston rod. | XC68 hard chrome plated, stainless steel piston rod. | |
1.4.4. Configure CS1 series products
(Back to cylinder actuators index)▲
Series CS1 air cylinder is SMC's largest bore cylinder.
This series is available in bore sizes up to 300mm and stroke lengths up to 2400mm.
Additionally, the CS1 can be ordered auto-switch capable.
Other options include, large bore sizes up to 300mm, various mounting configurations, cushion for noise damping.
Read more about this series in the SMC datasheet for CS1 or start configuring your CS1 by selecting a product type in below selection table:
This series is available in bore sizes up to 300mm and stroke lengths up to 2400mm.
Additionally, the CS1 can be ordered auto-switch capable.
Other options include, large bore sizes up to 300mm, various mounting configurations, cushion for noise damping.
Read more about this series in the SMC datasheet for CS1 or start configuring your CS1 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
| This version is NOT pre-lubricated so a lubricator in your system is required. Bore sizes range from 125mm to 300mm. Strokes are up to 2400mm. | Bore sizes range from 125mm to 300mm. Strokes are up to 2400mm. | Bore sizes are 125, 140, 160, 180, 200, 250 and 300mm. Mountings are basic, foot, flange, trunnion. Rod boots and cushions available. Auto switch capable for 125mm-200mm bores. | Bore sizes are 125, 140, 160, 180, 200, 250 and 300mm. Mountings are basic, foot, flange, trunnion. Rod boots and cushions available. Auto switch capable for 125mm-200mm bores. | Available with Rc, NPT or G port threads. Bore sizes are 125, 140 and 160mm. Auto switch capable. Variety of lead wires or prewired connectors. | Bore sizes are 125, 140 and 160mm. Strokes are up to 1600mm available. Seven mounting options available. Auto switch capable. | Bore sizes are 125, 140 and 160mm. Mountings are basic, foot, flange, trunnion. Rod boots available (cushion not available). Auto switch capable. |
1.4.5. Configure MB-Z series products
(Back to cylinder actuators index)▲
The MB series is a light weight, medium duty tie-rod cylinder.
Available bore sizes range from 32mm to 125mm.
The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing.
The MB series is available with many standard options, which include stroke adjustment, tandem, high/low temperature seals, heavy rod scraper, non-rotating rod, double rod and many more.
Read more about this series in the SMC datasheet for MB or start configuring your MB by selecting a product type in below selection table:
Available bore sizes range from 32mm to 125mm.
The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing.
The MB series is available with many standard options, which include stroke adjustment, tandem, high/low temperature seals, heavy rod scraper, non-rotating rod, double rod and many more.
Read more about this series in the SMC datasheet for MB or start configuring your MB by selecting a product type in below selection table:
|
|
 |
 |
 |
 |
 |
 |
 |
| Lighter weight. Bore sizes are 32, 40, 50, 63, 80, 100, 125mm. Mounts are basic, axial foot, rod or head flange, single or double clevis and center trunnion. Variety of switches. RoHS compliant. | Bore sizes are 32, 40, 50, 63, 80, 100, 125mm. Mounts are basic, axial foot, flange and center trunnion. Variety of switches. RoHS compliant. | Bore sizes are 32, 40, 50, 63, 80, 100mm. Strokes from 25mm through 800mm depending upon bore size. Mounts are basic, foot, front or rear flange, single or double clevis & center trunnion. With or without nylon or heat-resistant rod boot. | Bore sizes are 32, 40, 50, 63, 80, 100mm. Strokes from 25mm through 700mm depending upon bore size. Mounts are basic, foot, flange, & center trunnion. With or without nylon or heat-resistant rod boot, one end only. | 6 bore sizes available from 32mm to 100mm. 7 mounting styles available. Double-acting, single rod. Auto switch capable. | Reduced weight. Can mount small auto switches on four surfaces. Dust-prevention from fastener (option). | Operating pressure is 0.05 to 1.0 MPa. Piston speed is 50 to 1000 mm/s. Air cushion or rubber bumper. Able to mount small auto switches on four surfaces. | Bore sizes are 32, 40, 50, 63, 80, 100mm. Strokes from 25mm through 700mm depending upon bore size. Mounts are basic, foot, flange, and clevis. With or without nylon or heat-resistant rod boot. |
1.5. Compact actuators
(back to main index)▲
1.5.1. Configure NCQ2 series (imperial) products
(Back to cylinder actuators index)▲
The NCQ2 compact cylinder is the inch (imperial) version of the world's best selling pneumatic cylinder and can be supported globally.
The NCQ2 is available in 13 bore sizes from 12mm to 160mm.
It comes standard with male or female piston rod threads.
Read more about this series in the SMC datasheet for NCQ2 or start configuring your NCQ2 by selecting a product type in below selection table:
The NCQ2 is available in 13 bore sizes from 12mm to 160mm.
It comes standard with male or female piston rod threads.
Read more about this series in the SMC datasheet for NCQ2 or start configuring your NCQ2 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Available in double-acting, single rod and bore sizes from 12mm to 100mm. | Available in double-acting, single rod and bore sizes from 12mm to 63mm. | Available in double-acting, double rod and bore sizes from 12mm to 63mm. | Available in single-acting single rod and bore sizes from 12mm to 50mm. | Available in single-acting single rod and bore sizes from 12mm to 50mm. | Available in double-acting, single rod and bore sizes from 125mm to 160mm. | Available in double-acting double rod and bore sizes from 12mm to 100mm. | Available in double-acting, double rod and bore sizes from 125mm to 160mm. | Low-temperature option (XB7) from -40°F to 158°F (-40°C to +70°C), high temperature option (XB6) from +10°F to +302°F (-12°C to +150°C) and heat-resistant auto switch option (XB14) from 0°F to 302°F. | XB13 for low-speed applications (5 to 50mm/s). | XC8 stroke adjustable for the extend stroke. | XC9 stroke adjustable for the retract stroke. | XC10 dual stroke, double rod type (4 positions). | XC11 dual stroke, singe rod type (3 positions). | XC4 Heavy duty scraper for dusty environments. | XC35 Rod coil scraper for welding icy or frosty environments. | XC6 stainless steel piston rod option. | |||
1.5.2. Configure CQ2 series (metric) products
(Back to cylinder actuators index)▲
The CQ2 compact cylinder is the world's best selling metric pneumatic cylinder and is supported globally.
Available in 15 bore sizes from 12mm to 200mm. It comes standard with male or female piston rod threads.
42 standard options make it one of the most versatile cylinder series on the market.
For mounting flexibility, it is possible to mount auto switches on any of the 4 surfaces.
Read more about this series in the SMC datasheet for CQ2 or start configuring your CQ2 by selecting a product type in below selection table:
Available in 15 bore sizes from 12mm to 200mm. It comes standard with male or female piston rod threads.
42 standard options make it one of the most versatile cylinder series on the market.
For mounting flexibility, it is possible to mount auto switches on any of the 4 surfaces.
Read more about this series in the SMC datasheet for CQ2 or start configuring your CQ2 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Available in bore sizes from 12mm to 100mm. | Available in bore sizes from 12mm to 100mm. | Available in bore sizes from 12mm to 50mm. | Available in bore sizes from 12mm to 50mm. | Available in bore sizes from 125mm to 200mm. | Available in bore sizes from 125mm to 200mm. | Available in bore sizes from 12mm to 100mm and strokes are up to 200mm. | Available in bore sizes from 12mm to 63mm. | Available in bore sizes from 12mm to 63mm. | Both ports on one side of the actuator. Available in bore sizes from 12mm to 100mm. | Ports on the end of the actuator. Available in bore sizes from 12mm to 50mm. | Ports on the end of the actuator. Available in bore sizes from 12mm to 50mm. | End of stroke locks are included can be used to hold a load in case of a loss of air pressure. | It includes a rod wiper to prevent moisture from entering the actuator. Available in bore sizes from 20mm to 100mm. | The C(D)Q2Y-Z double-acting cylinder is available in bore sizes from 32mm to 100mm. | High-temperature option (XB6) temperature range 10°F to 302°F (-23°C to +150°C). | Low-temperature option (XB7) temperature range -40°F to 158°F (-40°C to +70°C). | Heat-resistant auto switch option (XB14) temperature range 0°F to +302°F (-17°C to +150°C;). | High lateral load version of the standard double-acting, single rod version of the CQ2 compact cylinder allows for higher side loads that the standard CQ2. | XB9 for low-speed applications (10 to 50mm/s). | XB13 for low-speed applications (5 to 50mm/s). | XC8 stroke adjustable for the extend stroke. | XC9 stroke adjustable for the retract stroke. | XC10 dual stroke, double rod type (4 positions). | XC11 dual stroke, singe rod type (3 positions). | XB14 cylinder with heat-resistant auto-switch, max temp +302°F (+150°C). | XC4 heavy-duty scraper for dusty environments. | XC35 rod coil scraper for welding icy or frosty environments. | XC6 stainless steel piston rod option. | XC85 grease for food processing machines. | XC92 dust-resistant cylinder for micro powder environments. | |
1.5.3. Configure NCQ8 series products
(Back to cylinder actuators index)▲
SMC's NCQ8 series is a square body, compact interchange type cylinder that allows close center to center mounting.
Mounting of the auto switch is easy and is mountable on multi-sides.
Use of the retaining ring method improves maintenance performance.
Replacing seals is easily obtained by removing the collar.
Read more about this series in the SMC datasheet for NCQ8 or start configuring your NCQ8 by selecting a product type in below selection table:
Mounting of the auto switch is easy and is mountable on multi-sides.
Use of the retaining ring method improves maintenance performance.
Replacing seals is easily obtained by removing the collar.
Read more about this series in the SMC datasheet for NCQ8 or start configuring your NCQ8 by selecting a product type in below selection table:
 |
|
|
 |
 |
| Cylinder stroke range: 1/8" to 4". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 2". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 2". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 4". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. |
1.5.4. Configure CQS series products
(Back to cylinder actuators index)▲
The CQS compact cylinder is available for those small bore cylinder applications where saving space is a concern.
The CQS offers standard long strokes (up to 300mm) in four bore sizes from 12 to 25mm.
Long stroke versions incorporate a wear band and thicker piston to handle the increased bearing needs of the longer strokes.
Both switch capable and non-switch capable body styles are the same, and switches can be mounted on three (12-16 bore) and four (20-25 bore) sides.
An increased side load version (CQS*S) is available for more demanding applications.
Read more about this series in the SMC datasheet for CQS or start configuring your CQS by selecting a product type in below selection table:
The CQS offers standard long strokes (up to 300mm) in four bore sizes from 12 to 25mm.
Long stroke versions incorporate a wear band and thicker piston to handle the increased bearing needs of the longer strokes.
Both switch capable and non-switch capable body styles are the same, and switches can be mounted on three (12-16 bore) and four (20-25 bore) sides.
An increased side load version (CQS*S) is available for more demanding applications.
Read more about this series in the SMC datasheet for CQS or start configuring your CQS by selecting a product type in below selection table:
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Bore sizes are 12, 16, 20, 25mm. Strokes from 5mm through 300mm depending upon bore size. Mounts are through hole/both ends tapped, foot, front or rear flanges, double clevis. Variety of switches and a variety of lead wire lengths. | Bore sizes are 12, 16, 20, 25mm. Strokes from 5mm through 50mm depending upon bore size. Mounts are through hole/both ends tapped, foot, flange. Variety of switches and a variety of lead wire lengths. | Bore sizes are 12, 16, 20, 25mm. Strokes are 5mm through 50mm depending upon bore size. Mounts are through hole, both ends tapped, foot, front or rear flanges, double clevis. Variety of switches and a variety of lead wire lengths. | Bore sizes are 12, 16, 20, 25mm.Strokes from 5mm through 50mm depending upon bore size. Mounts are through hole/both ends tapped, foot, flange. Variety of switches and lead wire lengths. | Bore sizes in 12, 16, 20, 25mm. Strokes are 5mm and 10mm. Mounts are through hole, both ends tapped, foot, front or rear flanges. Variety of switches and a variety of lead wire lengths. | Bore sizes in 12, 16, 20, 25mm. Strokes are 5mm and 10mm. Mounts are through hole, both ends tapped, foot, front or rear flanges. Variety of switches and a variety of lead wire lengths. | Bore sizes are 12, 16, 20, 25mm. Strokes are 5mm through 50mm depending upon bore size. Mounts are through hole, both ends tapped, foot, front or rear flanges, double clevis. Variety of switches and a variety of lead wire lengths. | Low friction type. Mountings are basic, foot, front and rear flange, double clevis. Bore sizes are 12, 16, 20, 25mm. Strokes are up to 50mm. Auto switch capable. | Bore sizes are 12, 16, 20, 25mm. Strokes from 5mm through 50mm depending upon bore size. Variety of switches and lead wires or prewired connectors. | Bore sizes are 12, 16, 20, 25mm. Strokes from 5mm through 50mm depending upon bore size. Variety of switches and lead wires or prewired connectors. | Bore sizes are 12, 16, 20, 25mm. Strokes are up to 50mm. Auto switch capable. | Bore sizes are 12, 16, 20, 25mm. Strokes are up to 50mm. Auto switch capable. |
1.5.5. Configure MU series products
(Back to cylinder actuators index)▲
The MU plate cylinder, with its elliptical design, provides a low profile while maintaining force output.
The MU cylinder can eliminate the need for higher operating pressures that may be required for typical flat cylinders.
The oval piston shape also provides an intrinsic non-rotating function without having to use a rod with flats, offering increased bearing and seal life.
Read more about this series in the SMC datasheet for MU or start configuring your MU by selecting a product type in below selection table:
The MU cylinder can eliminate the need for higher operating pressures that may be required for typical flat cylinders.
The oval piston shape also provides an intrinsic non-rotating function without having to use a rod with flats, offering increased bearing and seal life.
Read more about this series in the SMC datasheet for MU or start configuring your MU by selecting a product type in below selection table:
|
|
 |
 |
 |
| Possible to mount without brackets. Auto switch mounting grooves prevent projection of auto switches. Auto switches can be mounted in 4 directions. Strokes are up to 300mm. | Possible to mount without brackets. Auto switch mounting grooves prevent projection of auto switches. Auto switches can be mounted in 4 directions. Strokes are up to 300mm. | Possible to mount without brackets. Auto switch mounting grooves prevent projection of auto switches. Auto switches can be mounted in 4 directions. Strokes are up to 20mm. | Possible to mount without brackets. Auto switch mounting grooves prevent projection of auto switches. Auto switches can be mounted in 4 directions. Strokes are up to 20mm. |
1.6. Interchange Type Actuators
(back to main index)▲
1.6.1. Configure NCA1 series products
(Back to cylinder actuators index)▲
Series NCA1 medium duty tie-rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles.
Bore sizes range from 1-1/2" to 4".
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
Bore sizes range from 1-1/2" to 4".
The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.
Read more about this series in the SMC datasheet for NCA1 or start configuring your NCA1 by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
| Medium duty tie-rod cylinders are double-acting, single rod, double rod, non-rotating, oversized road, large road options. | XB6 high-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB7 low-temperature-resistant option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XB9 low-speed option. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC8 adjustable stroke, extension type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC9 adjustable stroke, retraction type. Series NCA1 medium duty tie-rod cylinders are double-acting. | XC6 stainless steel piston rod option is double-acting, environment option. | XC22 fluoro-rubber seals option is double-acting, environment option. | XC35 coil scraper option is double-acting, environment option. | X130US stainless steel parts are piston rod, tie-rod/nut, cushion valve needle. | |
1.6.2. Configure NCQ8 series products
(Back to cylinder actuators index)▲
SMC's NCQ8 series is a square body, compact interchange type cylinder that allows close center to center mounting.
Mounting of the auto switch is easy and is mountable on multi-sides.
Use of the retaining ring method improves maintenance performance.
Replacing seals is easily obtained by removing the collar.
Read more about this series in the SMC datasheet for NCQ8 or start configuring your NCQ8 by selecting a product type in below selection table:
Mounting of the auto switch is easy and is mountable on multi-sides.
Use of the retaining ring method improves maintenance performance.
Replacing seals is easily obtained by removing the collar.
Read more about this series in the SMC datasheet for NCQ8 or start configuring your NCQ8 by selecting a product type in below selection table:
|
|
|
|
|
| Cylinder stroke range: 1/8" to 4". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 2". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 2". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. | Cylinder stroke range: 1/8" to 4". Maximum operating pressure is 200PSI. Operating temperature range is +15°F to +150°F (-9°C to +65°C). Auto switch capable. |
1.6.3. Configure NCM series (Stainless Steel) products
(Back to cylinder actuators index)▲
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders.
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes.
The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring-return or spring-extend models.
The NCM is auto-switch capable without any change in cylinder dimension.
Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Read more about this series in the SMC datasheet for NCM or start configuring your NCM by selecting a product type in below selection table:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Available for front nose, double end and rear pivot mounting. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose double end mounting. The double end mount does automatically include a rear clevis hole. Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Bore sizes range from 3/4" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 12". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for front nose, double end and rear pivot mounting. Bore sizes range from 3/4" to 1-1/2" and standard strokes from 1/2" to 6". | Available for double-acting, single rod and bore sizes range from 7/16" to 1-1/2" and standard strokes from 1/2" to 12". | High-temperature option (XB6) temperature range -4°F to +300°F (-20°C to +150°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Low-temperature option (XB7) temperature range -22°F to 158°F (-30°C to +70°C). Available for front nose, double end and rear pivot mounting. Bore sizes are 3/4", 7/8", 1 1/16",1 1/4" and 1-1/2". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot, and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | Available for front nose, double end, rear pivot and block mount. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12". | |
1.6.4. Configure C85 series (ISO 6432) products
(Back to cylinder actuators index)▲
The C85 series conforms to ISO 6432 and CETOP RP52P.
The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm.
A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments.
With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.
Read more about this series in the SMC datasheet for C85 or start configuring your C85 by selecting a product type in below selection table:
The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm.
A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments.
With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.
Read more about this series in the SMC datasheet for C85 or start configuring your C85 by selecting a product type in below selection table:
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
| Crimped cylinder, conforms to ISO 6432 and CETOP RP52P. Bore sizes are 8, 10, 12, 16, 20, 25mm. Standard strokes are up to 300mm. Auto switch capable. | Fluid is air. Bore sizes are 8, 10, 12, 16, 20, 25mm. Strokes are up to 300mm (depending on bore). Auto switches available (order separate). | Bore sizes are 8, 10, 12, 16, 20, 25mm. Standard strokes are up to 150mm. Auto switch capable. | Bore sizes are 8, 10, 12, 16, 20, 25mm. Standard strokes are up to 150mm. Auto switch capable. | Bore sizes are 8, 10, 12, 16, 20, 25mm. Cushion is rubber bumper only. Strokes are up to 300 (depending on bore). Auto switches available (order separate). | ore sizes are 8, 10, 12, 16, 20, 25mm. Standard strokes are up to 150mm. Auto switch capable. | Bore sizes are 8, 10, 12, 16, 20, 25mm. Standard strokes are up to 150mm. Auto switch capable. | Bore sizes are 8, 10, 12, 16, 20, 25mm. Cushion is rubber bumper only. Strokes are up to 160mm (depending on bore). Auto switches available (order separate). | High temperature (XB6) ambient range +14°F to +302°F (-10°C to 150°C). Bore sizes are up to 25mm. | ow temperature (XB7) ambient range -40°F to +174°F (-40°C to 70°C). Bore sizes are up to 25mm. | |
1.6.5. Configure C95 series products
(Back to cylinder actuators index)▲
The C95 is ISO, VDMA24562 interchangeable, and utilizes a tie-rod construction.
In addition to standard cushions, wear band, the C95 utilizes a "floating" cushion seal design that greatly improves operation.
Read more about this series in the SMC datasheet for C95 or start configuring your C95 by selecting a product type in below selection table:
In addition to standard cushions, wear band, the C95 utilizes a "floating" cushion seal design that greatly improves operation.
Read more about this series in the SMC datasheet for C95 or start configuring your C95 by selecting a product type in below selection table:
|
 |
|
| Conforms to ISO 6431, CETOP RP43P, VDMA 24562. Large bore size (125~250mm). Standard strokes are up to 2400mm (depending on bore size). Stainless steel rod. Auto switch capable. | ISO/VDMA cylinder with lock. Bore sizes 32, 40, 50, 63, 80, 100mm. Standard strokes up to 800mm. Auto switch capable. |
1.6.6. Configure C96 series (ISO 15552) products
(Back to cylinder actuators index)▲
Series C96 cylinders conform to ISO 15552. The series is available with a single or double rod in 6 bore sizes from ø32 to ø125mm.
High accuracy covers and tie-rod nuts improve mounting accuracy and extend the cylinder life.
Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.
Standard strokes range from 25 to 800mm.
Read more about this series in the SMC datasheet for C96 or start configuring your C96 by selecting a product type in below selection table:
High accuracy covers and tie-rod nuts improve mounting accuracy and extend the cylinder life.
Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.
Standard strokes range from 25 to 800mm.
Read more about this series in the SMC datasheet for C96 or start configuring your C96 by selecting a product type in below selection table:
|
|
 |
| Bore sizes are 32, 40, 50, 63, 80, 100mm. Standard strokes are up to 800mm. Auto switch capable. | Bore size is 125mm. Standard strokes are up to 800mm. Auto switch capable. |
1.6.7. Configure CP96 series (ISO 15552) products
(Back to cylinder actuators index)▲
CP96, profile tube design ISO cylinder with enclosed tie-rods, is available in 6 bore sizes from ø32 to ø125mm.
High accuracy covers and tie-rod nuts improve mounting accuracy and extend the cylinder life.
Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.
Standard strokes range from 25 to 800mm.
Read more about this series in the SMC datasheet for CP96 or start configuring your CP96 by selecting a product type in below selection table:
High accuracy covers and tie-rod nuts improve mounting accuracy and extend the cylinder life.
Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.
Standard strokes range from 25 to 800mm.
Read more about this series in the SMC datasheet for CP96 or start configuring your CP96 by selecting a product type in below selection table:
|
 |
|
|
| Bore sizes are 32, 40, 50, 63, 80, 100mm. End of stroke air cushion and rubber bumper. Standard strokes are up to 800mm. Auto switch capable. | double-acting, bore size is 125mm. End of stroke cushioning. | double-acting, non-rotating, single or double rod. Bore sizes are 32, 40, 50, 63, 80, 100mm. Standard strokes are up to 800mm. Auto switch capable. |
1.6.8. Configure C75 series products
(Back to cylinder actuators index)▲
The C75 series air cylinders offer a simple, space saving design with high dimensional accuracy, making thes cylinders very easy to use.
Large spanner flats on the rod and head covers greatly simplify their installation and positioning.
Read more about this series in the SMC datasheet for C75 or start configuring your C75 by selecting a product type in below selection table:
Large spanner flats on the rod and head covers greatly simplify their installation and positioning.
Read more about this series in the SMC datasheet for C75 or start configuring your C75 by selecting a product type in below selection table:
|
|
 |
 |
 |
 |
|
|
| Bore sizes are 32 and 40mm. Available in 3 basic mounting styles. Rubber cushion or air cushion. Rod boots available. 5 standard mounting brackets available. | Bore sizes are 32 and 40mm. Max. operating pressure is 1Mpa. Rubber cushion or air cushion. rod boots available. | Bore sizes are 32 and 40mm. Strokes are up to 250mm. Auto switch capable. | Bore sizes are 32 and 40mm. Strokes are up to 250mm. Auto switch capable. | Bore sizes are 32 and 40mm. Strokes are up to 300mm (standard). Auto switch capable. | Bores sizes are 32 and 40mm. Strokes are up to 250mm (standard). Auto switch capable. | Bores sizes are 32 and 40mm. Strokes are up to 250mm (standard). Auto switch capable. |
1.6.9. Configure CG5 series (X6011) products
(Back to cylinder actuators index)▲
SMC's CG5-X6011 series is a NFPA mounting interchangeable, stainless steel cylinder, perfect for use in wash down applications such as food processing machinery requiring intense cleaning.
The use of non-toxic additives allows confident use in equipment for foods, beverages and medical products, etc.
The CG5-S can be disassembled, allowing replacement of seals, which promotes an extended service life.
SMC provides plugs for unused mounting threads to prevent residue build-up in the threads.
The use of stainless steel (SUS304) on external metal parts provides improved corrosion resistance in environments with exposure to water.
Read more about this series in the SMC datasheet for CG5 or start configuring your CG5 by selecting a product type in below selection table:
The use of non-toxic additives allows confident use in equipment for foods, beverages and medical products, etc.
The CG5-S can be disassembled, allowing replacement of seals, which promotes an extended service life.
SMC provides plugs for unused mounting threads to prevent residue build-up in the threads.
The use of stainless steel (SUS304) on external metal parts provides improved corrosion resistance in environments with exposure to water.
Read more about this series in the SMC datasheet for CG5 or start configuring your CG5 by selecting a product type in below selection table:
|
 |
| NFPA mounting interchangeable, all SUS stainless steel air cylinder. 5 bore sizes. 9 NFPA mounting options. NBR or FKM seal material. Auto switch capable. |
1.7. Special Applications Actuators
(back to main index)▲
1.7.1. Configure CG5-S series products
(Back to cylinder actuators index)▲
SMC's CG5-S series is a stainless steel cylinder, perfect for use in wash down applications such as food processing machinery requiring intense cleaning.
The use of non-toxic additives allows confident use in equipment for foods, beverages and medical products, etc.
The CG5-S can be disassembled, allowing replacement of seals, which promotes an extended service life.
SMC provides plugs for unused mounting threads to prevent residue build-up in the threads.
The use of stainless steel (SUS304) on external metal parts provides improved corrosion resistance in environments with exposure to water.
Read more about this series in the SMC datasheet for CG5-S or start configuring your CG5-S by selecting a product type in below selection table:
The use of non-toxic additives allows confident use in equipment for foods, beverages and medical products, etc.
The CG5-S can be disassembled, allowing replacement of seals, which promotes an extended service life.
SMC provides plugs for unused mounting threads to prevent residue build-up in the threads.
The use of stainless steel (SUS304) on external metal parts provides improved corrosion resistance in environments with exposure to water.
Read more about this series in the SMC datasheet for CG5-S or start configuring your CG5-S by selecting a product type in below selection table:
|
|
|
| All stainless steel external parts. Special scraper prevents water from entering cylinder. Bore sizes are 20, 25, 32, 40, 50, 63, 80 and 100mm. Auto switch capability. | NFPA mounting interchangeable, all SUS stainless steel air cylinder. 5 bore sizes. 9 NFPA mounting options. NBR or FKM seal material. Auto switch capable. |
1.7.2. Configure CJ5 series products
(Back to cylinder actuators index)▲
Series CJ5-S is a small bore stainless steel cylinder, designed for use in environments with water spray (such as food processing machines).
A special scraper (standard) prevents water from entering the cylinder.
Non-toxic additives allow confident use in equipment for food, beverage and medical products, etc.
The CJ5-S series can be disassembled for replacement of seals.
Read more about this series in the SMC datasheet for CJ5 or start configuring your CJ5 by selecting a product type in below selection table:
A special scraper (standard) prevents water from entering the cylinder.
Non-toxic additives allow confident use in equipment for food, beverage and medical products, etc.
The CJ5-S series can be disassembled for replacement of seals.
Read more about this series in the SMC datasheet for CJ5 or start configuring your CJ5 by selecting a product type in below selection table:
|
|
| Stainless steel (SUS304) used for all exterior metal parts. Standard water resistant scraper prevents liquid leakage into the cylinder. 2 types of sealing material choices of NBR/FKM (nitrile rubber/fluoro rubber). Uses grease for food processing machines - meets FDA standards. Water-resistant auto switch is available. |
1.7.3. Configure RHC series products
(Back to cylinder actuators index)▲
High speed or high load cylinder applications frequently require additional speed and flow control devices to control the stopping of the load.
SMC's RHC series features a longer cushion design which is capable of stopping heavy or high speed loads while maintaining the simplicity of a standard air cushion cylinder.
This enhanced cushion allows the kinetic distance, which results in the ability to absorb up to 23.
8 ft-lb of energy and operate reliably at speeds up to 118 in/sec.
Even with the improved performance of the RHC, cushion adjustment remains as simple as adjusting the cushion needle valve.
Read more about this series in the SMC datasheet for RHC or start configuring your RHC by selecting a product type in below selection table:
SMC's RHC series features a longer cushion design which is capable of stopping heavy or high speed loads while maintaining the simplicity of a standard air cushion cylinder.
This enhanced cushion allows the kinetic distance, which results in the ability to absorb up to 23.
8 ft-lb of energy and operate reliably at speeds up to 118 in/sec.
Even with the improved performance of the RHC, cushion adjustment remains as simple as adjusting the cushion needle valve.
Read more about this series in the SMC datasheet for RHC or start configuring your RHC by selecting a product type in below selection table:
|
|
| Bore sizes are 20, 25, 32, 40, 50, 63, 80 and 100mm. Stroke lengths are 200 to 1500mm. Auto switch capable. |
1.7.3. Configure MGZ series products
(Back to cylinder actuators index)▲
The MGZ series is a non-lube double power air cylinder available in both rotating and non-rotating styles.
The MGZ's unique design doubles the pressurized area for extension making the MGZ an ideal cylinder for lifting and pressing operations.
The front end lock style MGZ holds the rod when extended.
Read more about this series in the SMC datasheet for MGZ or start configuring your MGZ by selecting a product type in below selection table:
The MGZ's unique design doubles the pressurized area for extension making the MGZ an ideal cylinder for lifting and pressing operations.
The front end lock style MGZ holds the rod when extended.
Read more about this series in the SMC datasheet for MGZ or start configuring your MGZ by selecting a product type in below selection table:
|
|
 |
 |
| Bore sizes are 20, 25, 32, 40, 50, 63, 80mm. Standard strokes from 75 to 1000mm. Port thread types: PT, NPT, G. Optional coil scraper. Auto switch capable. | Bore sizes are 40, 50, 63mm. Standard strokes from 75 to 1000mm. Port thread types: PT, NPT, G. Auto switch capable. | Bore sizes are 20, 25, 32, 40, 50, 63, 80mm. Standard strokes from 75 to 1000mm. Port thread types: PT, NPT, G. Optional coil scraper. Auto switch capable. |
1.8. Locking Actuators
(back to main index)▲
1.8.1. Configure CNA2 series products
(Back to cylinder actuators index)▲
The CNA2 series cylinder with lock is suitable for mid-stroke stops, emergency stops, and drop prevention.
An equal holding force in extending and retracting directions make it possible to lock at either end of the stroke.
High reliability and stable holding force are maintained by using a substantially lengthened brake shoe with superior wear resistance.
The locking mechanism is isolated from lock release air, so lock function is not diminished by excessive dirt or drain in compressed air.
Read more about this series in the SMC datasheet for CNA2 or start configuring your CNA2 by selecting a product type in below selection table:
An equal holding force in extending and retracting directions make it possible to lock at either end of the stroke.
High reliability and stable holding force are maintained by using a substantially lengthened brake shoe with superior wear resistance.
The locking mechanism is isolated from lock release air, so lock function is not diminished by excessive dirt or drain in compressed air.
Read more about this series in the SMC datasheet for CNA2 or start configuring your CNA2 by selecting a product type in below selection table:
|
|
 |
| Mounting: basic, axial foot, rod flange, head flange, single clevis, double clevis, center trunnion. Bore sizes (mm): 40, 50, 63, 80, 100. Strokes up to 1500mm (depending on bore size & mounting). Auto switch capable. | Mounting: basic, axial foot, rod flange, center trunnion. Bore sizes are 40, 50, 63, 80, 100mm. Strokes up to 700mm (depending on bore size). Auto switch capable. |
1.8.2. Configure MLGC series products
(Back to cylinder actuators index)▲
The MGC guide cylinder is ideal for material handling applications involving stopping, lifting, and pushing.
It combines the functions of a conventional linear cylinder, and a non-rotation device.
Features include standard air cushions, grease nipple, and switch capability.
Other features include, slide or ball bushing bearings, compact design, adjustable air cushion, and lightweight guided actuator.
Read more about this series in the SMC datasheet for MLGC or start configuring your MLGC by selecting a product type in below selection table:
It combines the functions of a conventional linear cylinder, and a non-rotation device.
Features include standard air cushions, grease nipple, and switch capability.
Other features include, slide or ball bushing bearings, compact design, adjustable air cushion, and lightweight guided actuator.
Read more about this series in the SMC datasheet for MLGC or start configuring your MLGC by selecting a product type in below selection table:
|
|
| Bore sizes are 20, 25, 32, 40mm. Available in spring, pneumatic or both locking mechanisms. Available in basic or front flange mounting. Lockable in either extend or retract stroke. Air cushion as standard. Auto-switch capable. |
1.8.3. Configure CLS series products
(Back to cylinder actuators index)▲
The CLS series cylinder with lock is ideal for applications requiring intermediate and emergency stop and drop prevention.
The compact lock unit is lightweight and saves space.
A switch is optional on the brake cylinder so the operating state of the lock unit (brake piston) can be detected using the switch signal.
By separating the lock mechanism and the brake cylinder, SMC has minimized the influences of unlocking air quality such as moisture and condensation.
Read more about this series in the SMC datasheet for CLS or start configuring your CLS by selecting a product type in below selection table:
The compact lock unit is lightweight and saves space.
A switch is optional on the brake cylinder so the operating state of the lock unit (brake piston) can be detected using the switch signal.
By separating the lock mechanism and the brake cylinder, SMC has minimized the influences of unlocking air quality such as moisture and condensation.
Read more about this series in the SMC datasheet for CLS or start configuring your CLS by selecting a product type in below selection table:
|
|
| Fail safe construction. Equal holding force in both directions. Lock unit switch. Improved maintainability. Strokes to 1600 depending upon mounting brackets. Auto switch capable cylinder. Auto switch capable brake unit. |
1.8.4. Configure CLA2 series products
(Back to cylinder actuators index)▲
The CLA2 cylinder acts as an air-operated brake with spring-backup. When external position feedback sends a signal to an air valve, the brake is actuated and fast-acting shoes grab the actuator shaft.
When pressure is removed, the spring automatically locks the brake onto the shaft.
Three locking mechanisms are available: spring lock, air pressure lock and air/spring pressure lock.
The CLA2 locks in either direction, comes in five bore sizes, and is available with PT or NPT ports.
Other features include non-lube operation, air cushions, and seven mounting styles.
Read more about this series in the SMC datasheet for CLA2 or start configuring your CLA2 by selecting a product type in below selection table:
When pressure is removed, the spring automatically locks the brake onto the shaft.
Three locking mechanisms are available: spring lock, air pressure lock and air/spring pressure lock.
The CLA2 locks in either direction, comes in five bore sizes, and is available with PT or NPT ports.
Other features include non-lube operation, air cushions, and seven mounting styles.
Read more about this series in the SMC datasheet for CLA2 or start configuring your CLA2 by selecting a product type in below selection table:
|
|
 |
| Mounting: basic, axial foot, rod flange, head flange, single clevis, double clevis, center trunnion. Bore sizes are 40, 50, 63, 80, 100mm. Strokes up to 1500mm (depending on bore size & mounting). Auto switch capable. | Mounting: basic, axial foot, rod flange, head flange, single clevis, double clevis, center trunnion. Bore sizes are 40, 50, 63, 80, 100mm. Strokes up to 1500mm (depending on bore size & mounting). Auto switch capable. |
1.8.5. Configure CLJ2 series products
(Back to cylinder actuators index)▲
The CLJ2 offers a brake mechanism to stop the position rod at any position while retracting or extending.
Choose from three different brake mechanisms to select the unit best suited for your application.
Compact and lightweight, the CLJ2 is part of SMC's CJ2 product line.
Read more about this series in the SMC datasheet for CLJ2 or start configuring your CLJ2 by selecting a product type in below selection table:
Choose from three different brake mechanisms to select the unit best suited for your application.
Compact and lightweight, the CLJ2 is part of SMC's CJ2 product line.
Read more about this series in the SMC datasheet for CLJ2 or start configuring your CLJ2 by selecting a product type in below selection table:
|
|
| Bore size: 16mm. Double-acting, single rod. Mountings: basic, foot, flange, double clevis. Auto switch capability. |